Emolsion Bituminous base primer B.C 164

Applications
Resistant subfloor in chemically corrosive, alkaline and humid environments
Preparation of surfaces that have become flaky or flaky due to humidity.
Prepares surfaces for the application of various resin coatings.
Capable of creating very high impermeability on surfaces.
Features and benefits
Creating strong and impermeable surfaces against various acidic and alkaline materials, water and moisture.
No shrinkage or cracking.
Stability against temperature changes.
Surface resistant to cracking during minor deformation.
Low coefficient of thermal expansion.
Increases speed and reduces implementation costs.
Very good adhesion to various materials such as concrete, stone, wood, etc.
How to use
About 100 to 150 grams to cover one meter with a thickness of 100 to 150 microns (depending on the porosity of the surfaces to be applied)

1- Substrate:

The surface under the work must be clean, dry and free of grease and waste.
If the surfaces under the work are very smooth, they must first be scratched with special tools.
On fresh concrete surfaces, the substratum operation with epoxy primer must be performed at least 28 days after concreting.
Surfaces with high porosity require two stages of priming to reduce epoxy consumption and reduce costs. If using a primer, allow the solvents to evaporate completely, then apply the coating.
2- Mixing:
Add the contents of the hardener container to the container containing the epoxy primer and pour into the mixer and mix well for 2 to 3 minutes.
3- Application:

The primer can be applied to the desired surface using a spray gun, brush or roller. The maximum time for use after mixing the materials is 30 minutes.

Product PDF file